The aim of the WEATHERFORD Technical Data Handbook is to provide comprehensive information to personnel involved in oil and gas well drilling, production, completion, and workover operations. This handbook is a compilation of data from various sources within the petroleum industry. While every effort has been made to ensure accuracy, WEATHERFORD, its agents, or subsidiaries do not guarantee its completeness or accuracy.
Weatherford Technical Data Handbook Content
- Bumper Subs & Drilling Jars
- Casing
- Casing Patches
- Casing Scrapers
- Cutters – Swivels – Underreamers
- Section Mills (milling in drilling) & Whipstocks
- Drill Collars – Kellys – Pipe Elevators – Spiders & Links
- Drill Pipe – HWDP
- Electrical Wire Line
- Junk Catchers
- Overshots
- Well Packer Retrievers – Casing Rollers & Reversing Tools
- Rock Drilling Bits & Floats
- Safety Joints – Knuckle Joints
- Spears – Spear Pack Offs
- Special Service Problems
- Stretch Data
- Sucker Rods
- Drill Pipe Tool Joints
- Tubing
- Wash Over Pipe
- General Information
Section 1: Fishing, Drilling, And Bumper Jars
This section provides data about:
- Weatherford Homco Bumper Jar
- Bowen Surface Jar
- Bowen Hydraulic Jar
- Bowen Super Fishing Jar
- Bowen Jar Intensifiers
- Bowen Cushion Sub
- Bowen Hydro-Mechanical Drilling Jar
- Bowen Lubricated Fishing Bumper Sub
- Bowen Fishing Bumper Sub
- Lee Oilfield Compounders
- Lee Oilfield Sj Type Fishing Jars
- Lee Oilfield Surface Jar
- National Oilwell (Griffith) Fishing Jars
- National Oilwell (Griffith) Extreme Service Fishing Jar
- National Oilwell (Griffith) Fishing Jar Intensifier
- National Oilwell (Griffith) Bumper Sub
- National Oilwell (Griffith) Double Acting
- Hydraulic/Mechanical Drilling Jar
- National Oilwell (Griffith) Drilling Jar Intensifiers
- National Oilwell (Griffith) Hydraulic/Mechanical Drilling Jar
- National Oilwell (Griffith) Double-Acting Drilling Jar Intensifiers
- National Oilwell (Griffith) Temperature Compensated Shock Tools
- National Oilwell (Griffith) Balanced Bumper Subs
- National Oilwell (Griffith) Mechanical Drilling Jars
- National Oilwell (Griffith) Pressure Compensated Shock Tools
- Pbl By Pass System
Weatherford Technical Data Handbook Section 2: Casing
This section provides data about:
- Api Casing Requirements And Range Lengths
- Casing Dimensional Data
- Casing Performance Properties
- Pressure Leak Resistance
- Make-Up Torque, Short Thread
- Make-Up Torque, Long Thread
- Make-Up Torque, Special Threads
- Drift Information For Casing
- Drift Information For Bare & Coated Casing
- Aluminum & Plain End Liners
- 1997 Casing Reference tables
Section 3: Casing Patches
This section provides data about:
- Weatherford Homcoâ„¢ Internal Liner Casing Patch
- Bowen Lead Seal
- Bowen Underwater
- Od’s On Special Drift Casings
Section 4: Casing Scrapers
- Weatherford Homco
- Bowen Tool
- Best Oil Tool
Section 5: Cutters-Swivels-Underreamers & Section Mills
- Weatherford (A-1) Casing Cutters
- Weatherford SCOR Tool
- Weatherford MOST Tool
- Weatherford Mechanical Inside Cutters
- Weatherford Mechanical Outside Cutters
- Bowen Internal “Itco” Cutter
- Bowen Hydraulic External Cutter
- Bowen Mechanical External Cutter
- Weatherford Mccullough External Cutter
- Weatherford Mccullough Internal Cutter
- Weatherford A-1 Marine Swivel
- A-Z Marine Swivel
- Weatherford Window Milling System
- Weatherford A-1 Underreamers Weatherford A-1 Section Mills
Section 6: Drill Collars & Kellys
- Weights
- Index Of Mechanical Properties
- Mechanical Properties Of Drill Collars
- Drilling Slips And Elevator Recesses
- Kellys Elevators, Spiders & Links
Weatherford Technical Data Handbook Section 7: Drill Pipe
- Api Drill Pipe Requirements
- Drill Pipe Dimensional Data
- Drill Pipe Performance Data (New, Premium & Class 2)
- New Drill Pipe & Tool Joints Mechanical Properties
- Premium Drill Pipe & Tool Joints Mechanical Properties
- Class 2 Drill Pipe & Tool Joints Mechanical Properties
- Grant Prideco High Torque (Ht) / Extreme Torque (Xt) Drill Pipe Tool Joint Properties
- Grant Prideco Special Grade V-150 Drill Pipe Properties
- Small Diameter Work String Data Heavy Weight Drill Pipe (Hwdp) Dimensional / Mechanical Properties
- Grant Prideco Spiral-Wate Pipe Properties
- Mill Slot & Groove Method Of Drill Pipe Identification
- Classification Of Used Drill Pipe
- Drill Pipe & Tool Joint Color Code Identification
Section 8: Electrical Wireline Service
- Free Point Indicators, Tornado Jet Perforators, Tubing Deflection Shots & Bow Strings
- Weatherford Homcoâ„¢ Tubing & Drill Pipe Wireline Swivel
- Sinker Bars, Downhole Shots, & DC Severing Tools
- J Ed Hill Junk Shots
- Jet Cutters
- Pipe Recovery Systems: Chemical Cutter
- Cablesa Cable Specifications
- Camesa Cable Size & Specifications
- Cable Stretch Charts
- Free Point For 1″ & 1-1/4″ Coiled Tubing Wireline Cement Bailers & Hydromite
Section 9: Junk Catchers
- Weatherford Homco Type “P” Junk Subs
- Weatherford Homco Type “H” Junk Baskets
- Bowen Reverse Circulating Junk Baskets
- Bowen Itco Type Junk Basket
- Bowen & K&G Fishing Magnets
Weatherford Technical Data Handbook Section 10: Overshots
- Bowen Fishing Overshots Series
- #010
- #020
- #070
- #150
- #160
- McCullough
Section 11: Packer Retrievers & Casing Rollers
- HE Well Packers Retriever Spear
- Bowen Simplex
- Bowen Packer Retriever
- Bowen Casing Roller
- HE Reversing Tool
Section 12: Rock Bits – Floats
- Comparison Chart
- Tolerances And Make-Up Torque
- Casing Versus Bit Clearances
- Bit Dull Grading
- Cone Dimensions
- Specifications
- Drill Pipe Floats
- 2000 Drill Bit Classifier And Types Of Drill Bits
Section 13: Safety Joints-Knuckle Joints
- Weatherford Homco Super
- Weatherford Homco Type ” B” & ” M”
- Bowen Knuckle Joint
Section 14: Spears And Spear Pack Off’s
- Bowen Spears
- Weatherford Wobo Connector
- Weatherford Homco Spears
- Spear Pack Off’s
- H-E Spears
- A-Z Spears
- Weatherford Mccullough Spears
- Weatherford Differential Packer
- Weatherford Homco Washover Drill Collar Spear
- Bowen-Lebus Anchor Washpipe Spear
Section 15: Special Service Problems
- Special Service Problems
Weatherford Technical Data Handbook Section 16: Stretch Data
- Tubing, Drill Pipe, And Casing Stretch Data
- Tubing Stretch Table
- Drill Pipe Stretch Table
- Casing Stretch Table
- Pipe Recovery
- Tubing Stretch Graphs
- Casing Stretch Graphs
- Set-Down And Slack Off Weights
- Slack Off Graphs
- Drill Pipe Stretch Graphs
- Buoyancy Factor
Section 17: Sucker Rods
- Dimensions
- Make-Up Torque
- Pulling Load
- Stength Table
- Fiberglass
- Weatherford Corod
Weatherford Technical Data Handbook Section 18: Tool Joints
- Api Regular
- Api Full Hole
- Api Internal Flush
- Api Numbered Connections
- Acme Regular
- Acme Streamline & Acme Full Hole
- American Iron Open Hole
- American Mt
- American Pac
- Hughes Double Streamline
- Hughes External Flush
- Hughes H-90
- Hughes Slim Hole
- Hughes Slimline H-90
- Hughes Xtra Hole
- Hydril If / F / Eiu Joints
- Reed Double Streamline
- Reed External Flush
- Reed Full Hole
- Reed Semi-Internal Flush
- X Series Drill Rod
- W Series Drill Rod
- Longyear Drill Rods
- Recommended Max – Min Tool Joint Dimensions
- Tool Joint Performance Properties
- Rotary Shoulder Connections Interchange List
Section 19: Tubing Data
- Api Tubing Requirements And Lengths
- Tubing Dimensional Data
- Tubing Performance Properties
- Maximum Hook Load On Tubing
- Dimensional Data On Selected Heavy Weight &
- Non-Api Tubing
- Performance Data On Selected Heavy Weight &
- Non-Api Tubing
- Fibreglass Tubing
- Coiled Tubing
- Dimensional Data On Special Tubing
- Make-Up Torque
- Drift Information For Tubing
- Drift Information For Bare & Coated Tubing
- Classification Of Used Tubing Work Strings
- Interchangeability Of 10 Rd Integral Tubing Thread
- 1996 Tubing Design Tables
Weatherford Technical Data Handbook Section 20: Wash Over Pipe
- Hydril Fj-Wp Washpipe Properties
- Misc Washpipe Threads Properties
Section 21: General Information
- Decimal Equivalents Of An Inch In Inches And Millimeters
- Commonunits Symbols
- Common Oilfield Conversion Factors
- Detailed Conversion Factors
- Weights, Measures & Temperatures
- Fluid Density & Pressure
- Tubing Movement Formulas
- Gas Flow Through Choke
- Cement Slurry Classes
- Capacity Of Vertical Cylindrical Tanks
- Capacity Of Bolted Steed Tanks
- Formulas For Calculating Capacities Of Tanks, Pits & Pipe Lines
- Physical Properties Of Calcium Chloride Solutions
- Weights Of Salt Water Solutions
- Drilling Mud & Oil Conversion Table
- Mud Weight Comparison Tables
- Oil, Water & Mud Specific Gravity Weight & Pressure Table Pump Output For Duplex & Triplex Pumps
- Formulas For:
- Areas Of Circles—Dia €” Area Tables
- Normal Formation Pressure
- Calculating Velocity & Horsepower
- Calculating Volumes & Height Between Pipe & Hole Etc
- Effect Of Depth & Mud Weight On Hydrostatic Pressure
- Psi Per Barrel
- Pressure Drop Across A Single Nozzle
- Brinell Hardness & Testing
- API Flanges
- Manual Tong Torque Ft Pounds
- Dimensional Data On Line Pipe
- Dimensional Data & Test Pressure On Line Pipe
- Recommendations For Tools Versus Casing & Hole Size
- Formulas Used In Well Control And Drilling Operations
- Mechanical Spliced Sling Capacity
- H2S Sour Gas Safety Information
- Dimensions & Weights Of Steel Tubular Flanges & Fittings
Download Weatherford Technical Data Handbook PDF:
Before downloading this handbook, I would like to express my gratitude to Weatherford for its invaluable contribution to the oil and gas industry. The technical data handbook compiled by Weatherford is an exceptional resource for those involved in drilling, production, completion, and workover operations. The comprehensive information provided in this handbook is a testament to the expertise and knowledge of Weatherford, and it is greatly appreciated by many oil and gas workers. Thank you for your commitment to excellence and for providing such a valuable resource to the industry.